##
## Settings for the Sieve interpreter
##
# Do not forget to enable the Sieve plugin in 15-lda.conf and 20-lmtp.conf
# by adding it to the respective mail_plugins= settings.
# The Sieve interpreter can retrieve Sieve scripts from several types of
# locations. The default `file' location type is a local filesystem path
# pointing to a Sieve script file or a directory containing multiple Sieve
# script files. More complex setups can use other location types such as
# `ldap' or `dict' to fetch Sieve scripts from remote databases.
#
# All settings that specify the location of one ore more Sieve scripts accept
# the following syntax:
#
# location = [<type>:]path[;<option>[=<value>][;...]]
#
# If the type prefix is omitted, the script location type is 'file' and the
# location is interpreted as a local filesystem path pointing to a Sieve script
# file or directory. Refer to Pigeonhole wiki or INSTALL file for more
# information.
plugin {
# The location of the user's main Sieve script or script storage. The LDA
# Sieve plugin uses this to find the active script for Sieve filtering at
# delivery. The "include" extension uses this location for retrieving
# :personal" scripts. This is also where the ManageSieve service will store
# the user's scripts, if supported.
#
# Currently only the 'file:' location type supports ManageSieve operation.
# Other location types like 'dict:' and 'ldap:' can currently only
# be used as a read-only script source ().
#
# For the 'file:' type: use the ';active=' parameter to specify where the
# active script symlink is located.
# For other types: use the ';name=' parameter to specify the name of the
# default/active script.
sieve = file:~/sieve;active=~/.dovecot.sieve
# The default Sieve script when the user has none. This is the location of a
# global sieve script file, which gets executed ONLY if user's personal Sieve
# script doesn't exist. Be sure to pre-compile this script manually using the
# sievec command line tool if the binary is not stored in a global location.
# --> See sieve_before for executing scripts before the user's personal
# script.
#sieve_default = /var/lib/dovecot/sieve/default.sieve
# The name by which the default Sieve script (as configured by the
# sieve_default setting) is visible to the user through ManageSieve.
#sieve_default_name =
# Location for ":global" include scripts as used by the "include" extension.
#sieve_global =
# The location of a Sieve script that is run for any message that is about to
# be discarded; i.e., it is not delivered anywhere by the normal Sieve
# execution. This only happens when the "implicit keep" is canceled, by e.g.
# the "discard" action, and no actions that deliver the message are executed.
# This "discard script" can prevent discarding the message, by executing
# alternative actions. If the discard script does nothing, the message is
# still discarded as it would be when no discard script is configured.
#sieve_discard =
# Location Sieve of scripts that need to be executed before the user's
# personal script. If a 'file' location path points to a directory, all the
# Sieve scripts contained therein (with the proper `.sieve' extension) are
# executed. The order of execution within that directory is determined by the
# file names, using a normal 8bit per-character comparison.
#
# Multiple script locations can be specified by appending an increasing number
# to the setting name. The Sieve scripts found from these locations are added
# to the script execution sequence in the specified order. Reading the
# numbered sieve_before settings stops at the first missing setting, so no
# numbers may be skipped.
#sieve_before = /var/lib/dovecot/sieve.d/
#sieve_before2 = ldap:/etc/sieve-ldap.conf;name=ldap-domain
#sieve_before3 = (etc...)
sieve_before = /etc/dovecot/sieve/default.sieve
# Identical to sieve_before, only the specified scripts are executed after the
# user's script (only when keep is still in effect!). Multiple script
# locations can be specified by appending an increasing number.
#sieve_after =
#sieve_after2 =
#sieve_after2 = (etc...)
# Which Sieve language extensions are available to users. By default, all
# supported extensions are available, except for deprecated extensions or
# those that are still under development. Some system administrators may want
# to disable certain Sieve extensions or enable those that are not available
# by default. This setting can use '+' and '-' to specify differences relative
# to the default. For example `sieve_extensions = +imapflags' will enable the
# deprecated imapflags extension in addition to all extensions were already
# enabled by default.
#sieve_extensions = +notify +imapflags
# Which Sieve language extensions are ONLY available in global scripts. This
# can be used to restrict the use of certain Sieve extensions to administrator
# control, for instance when these extensions can cause security concerns.
# This setting has higher precedence than the `sieve_extensions' setting
# (above), meaning that the extensions enabled with this setting are never
# available to the user's personal script no matter what is specified for the
# `sieve_extensions' setting. The syntax of this setting is similar to the
# `sieve_extensions' setting, with the difference that extensions are
# enabled or disabled for exclusive use in global scripts. Currently, no
# extensions are marked as such by default.
#sieve_global_extensions =
# The Pigeonhole Sieve interpreter can have plugins of its own. Using this
# setting, the used plugins can be specified. Check the Dovecot wiki
# (wiki2.dovecot.org) or the pigeonhole website
# (http://pigeonhole.dovecot.org) for available plugins.
# The sieve_extprograms plugin is included in this release.
sieve_plugins = sieve_imapsieve
# The separator that is expected between the :user and :detail
# address parts introduced by the subaddress extension. This may
# also be a sequence of characters (e.g. '--'). The current
# implementation looks for the separator from the left of the
# localpart and uses the first one encountered. The :user part is
# left of the separator and the :detail part is right. This setting
# is also used by Dovecot's LMTP service.
#recipient_delimiter = +
# The maximum size of a Sieve script. The compiler will refuse to compile any
# script larger than this limit. If set to 0, no limit on the script size is
# enforced.
#sieve_max_script_size = 1M
# The maximum number of actions that can be performed during a single script
# execution. If set to 0, no limit on the total number of actions is enforced.
#sieve_max_actions = 32
# The maximum number of redirect actions that can be performed during a single
# script execution. If set to 0, no redirect actions are allowed.
#sieve_max_redirects = 4
# The maximum number of personal Sieve scripts a single user can have. If set
# to 0, no limit on the number of scripts is enforced.
# (Currently only relevant for ManageSieve)
#sieve_quota_max_scripts = 0
# The maximum amount of disk storage a single user's scripts may occupy. If
# set to 0, no limit on the used amount of disk storage is enforced.
# (Currently only relevant for ManageSieve)
#sieve_quota_max_storage = 0
# The primary e-mail address for the user. This is used as a default when no
# other appropriate address is available for sending messages. If this setting
# is not configured, either the postmaster or null "<>" address is used as a
# sender, depending on the action involved. This setting is important when
# there is no message envelope to extract addresses from, such as when the
# script is executed in IMAP.
#sieve_user_email =
# The path to the file where the user log is written. If not configured, a
# default location is used. If the main user's personal Sieve (as configured
# with sieve=) is a file, the logfile is set to <filename>.log by default. If
# it is not a file, the default user log file is ~/.dovecot.sieve.log.
#sieve_user_log =
# Specifies what envelope sender address is used for redirected messages.
# The following values are supported for this setting:
#
# "sender" - The sender address is used (default).
# "recipient" - The final recipient address is used.
# "orig_recipient" - The original recipient is used.
# "user_email" - The user's primary address is used. This is
# configured with the "sieve_user_email" setting. If
# that setting is unconfigured, "user_mail" is equal to
# "recipient".
# "postmaster" - The postmaster_address configured for the LDA.
# "<user@domain>" - Redirected messages are always sent from user@domain.
# The angle brackets are mandatory. The null "<>" address
# is also supported.
#
# This setting is ignored when the envelope sender is "<>". In that case the
# sender of the redirected message is also always "<>".
#sieve_redirect_envelope_from = sender
## TRACE DEBUGGING
# Trace debugging provides detailed insight in the operations performed by
# the Sieve script. These settings apply to both the LDA Sieve plugin and the
# IMAPSIEVE plugin.
#
# WARNING: On a busy server, this functionality can quickly fill up the trace
# directory with a lot of trace files. Enable this only temporarily and as
# selective as possible.
# The directory where trace files are written. Trace debugging is disabled if
# this setting is not configured or if the directory does not exist. If the
# path is relative or it starts with "~/" it is interpreted relative to the
# current user's home directory.
#sieve_trace_dir =
# The verbosity level of the trace messages. Trace debugging is disabled if
# this setting is not configured. Possible values are:
#
# "actions" - Only print executed action commands, like keep,
# fileinto, reject and redirect.
# "commands" - Print any executed command, excluding test commands.
# "tests" - Print all executed commands and performed tests.
# "matching" - Print all executed commands, performed tests and the
# values matched in those tests.
#sieve_trace_level =
# Enables highly verbose debugging messages that are usually only useful for
# developers.
#sieve_trace_debug = no
# Enables showing byte code addresses in the trace output, rather than only
# the source line numbers.
#sieve_trace_addresses = no
}