multiple additions or whateva

Dovecot/conf.d/10-auth.conf

@@ -0,0 +1,128 @@
+##
+## Authentication processes
+##
+
+# Disable LOGIN command and all other plaintext authentications unless
+# SSL/TLS is used (LOGINDISABLED capability). Note that if the remote IP
+# matches the local IP (ie. you're connecting from the same computer), the
+# connection is considered secure and plaintext authentication is allowed.
+# See also ssl=required setting.
+disable_plaintext_auth = yes
+
+# Authentication cache size (e.g. 10M). 0 means it's disabled. Note that
+# bsdauth, PAM and vpopmail require cache_key to be set for caching to be used.
+#auth_cache_size = 0
+# Time to live for cached data. After TTL expires the cached record is no
+# longer used, *except* if the main database lookup returns internal failure.
+# We also try to handle password changes automatically: If user's previous
+# authentication was successful, but this one wasn't, the cache isn't used.
+# For now this works only with plaintext authentication.
+#auth_cache_ttl = 1 hour
+# TTL for negative hits (user not found, password mismatch).
+# 0 disables caching them completely.
+#auth_cache_negative_ttl = 1 hour
+
+# Space separated list of realms for SASL authentication mechanisms that need
+# them. You can leave it empty if you don't want to support multiple realms.
+# Many clients simply use the first one listed here, so keep the default realm
+# first.
+auth_realms = staff.libraryofcode.org
+
+# Default realm/domain to use if none was specified. This is used for both
+# SASL realms and appending @domain to username in plaintext logins.
+auth_default_realm = staff.libraryofcode.org
+
+# List of allowed characters in username. If the user-given username contains
+# a character not listed in here, the login automatically fails. This is just
+# an extra check to make sure user can't exploit any potential quote escaping
+# vulnerabilities with SQL/LDAP databases. If you want to allow all characters,
+# set this value to empty.
+#auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@
+
+# Username character translations before it's looked up from databases. The
+# value contains series of from -> to characters. For example "#@/@" means
+# that '#' and '/' characters are translated to '@'.
+#auth_username_translation =
+
+# Username formatting before it's looked up from databases. You can use
+# the standard variables here, eg. %Lu would lowercase the username, %n would
+# drop away the domain if it was given, or "%n-AT-%d" would change the '@' into
+# "-AT-". This translation is done after auth_username_translation changes.
+auth_username_format = %n
+
+# If you want to allow master users to log in by specifying the master
+# username within the normal username string (ie. not using SASL mechanism's
+# support for it), you can specify the separator character here. The format
+# is then <username><separator><master username>. UW-IMAP uses "*" as the
+# separator, so that could be a good choice.
+#auth_master_user_separator =
+
+# Username to use for users logging in with ANONYMOUS SASL mechanism
+#auth_anonymous_username = anonymous
+
+# Maximum number of dovecot-auth worker processes. They're used to execute
+# blocking passdb and userdb queries (eg. MySQL and PAM). They're
+# automatically created and destroyed as needed.
+#auth_worker_max_count = 30
+
+# Host name to use in GSSAPI principal names. The default is to use the
+# name returned by gethostname(). Use "$ALL" (with quotes) to allow all keytab
+# entries.
+#auth_gssapi_hostname =
+
+# Kerberos keytab to use for the GSSAPI mechanism. Will use the system
+# default (usually /etc/krb5.keytab) if not specified. You may need to change
+# the auth service to run as root to be able to read this file.
+#auth_krb5_keytab =
+
+# Do NTLM and GSS-SPNEGO authentication using Samba's winbind daemon and
+# ntlm_auth helper. <doc/wiki/Authentication/Mechanisms/Winbind.txt>
+#auth_use_winbind = no
+
+# Path for Samba's ntlm_auth helper binary.
+#auth_winbind_helper_path = /usr/bin/ntlm_auth
+
+# Time to delay before replying to failed authentications.
+#auth_failure_delay = 2 secs
+
+# Require a valid SSL client certificate or the authentication fails.
+#auth_ssl_require_client_cert = no
+
+# Take the username from client's SSL certificate, using
+# X509_NAME_get_text_by_NID() which returns the subject's DN's
+# CommonName.
+#auth_ssl_username_from_cert = no
+
+# Space separated list of wanted authentication mechanisms:
+#   plain login digest-md5 cram-md5 ntlm rpa apop anonymous gssapi otp skey
+#   gss-spnego
+# NOTE: See also disable_plaintext_auth setting.
+auth_mechanisms = plain login
+
+##
+## Password and user databases
+##
+
+#
+# Password database is used to verify user's password (and nothing more).
+# You can have multiple passdbs and userdbs. This is useful if you want to
+# allow both system users (/etc/passwd) and virtual users to login without
+# duplicating the system users into virtual database.
+#
+# <doc/wiki/PasswordDatabase.txt>
+#
+# User database specifies where mails are located and what user/group IDs
+# own them. For single-UID configuration use "static" userdb.
+#
+# <doc/wiki/UserDatabase.txt>
+
+#!include auth-deny.conf.ext
+#!include auth-master.conf.ext
+
+!include auth-system.conf.ext
+#!include auth-sql.conf.ext
+#!include auth-ldap.conf.ext
+#!include auth-passwdfile.conf.ext
+#!include auth-checkpassword.conf.ext
+#!include auth-vpopmail.conf.ext
+#!include auth-static.conf.ext

Dovecot/conf.d/10-director.conf

@@ -0,0 +1,61 @@
+##
+## Director-specific settings.
+##
+
+# Director can be used by Dovecot proxy to keep a temporary user -> mail server
+# mapping. As long as user has simultaneous connections, the user is always
+# redirected to the same server. Each proxy server is running its own director
+# process, and the directors are communicating the state to each others.
+# Directors are mainly useful with NFS-like setups.
+
+# List of IPs or hostnames to all director servers, including ourself.
+# Ports can be specified as ip:port. The default port is the same as
+# what director service's inet_listener is using.
+#director_servers =
+
+# List of IPs or hostnames to all backend mail servers. Ranges are allowed
+# too, like 10.0.0.10-10.0.0.30.
+#director_mail_servers =
+
+# How long to redirect users to a specific server after it no longer has
+# any connections.
+#director_user_expire = 15 min
+
+# TCP/IP port that accepts doveadm connections (instead of director connections)
+# If you enable this, you'll also need to add inet_listener for the port.
+#director_doveadm_port = 0
+
+# How the username is translated before being hashed. Useful values include
+# %Ln if user can log in with or without @domain, %Ld if mailboxes are shared
+# within domain.
+#director_username_hash = %Lu
+
+# To enable director service, uncomment the modes and assign a port.
+service director {
+  unix_listener login/director {
+    #mode = 0666
+  }
+  fifo_listener login/proxy-notify {
+    #mode = 0666
+  }
+  unix_listener director-userdb {
+    #mode = 0600
+  }
+  inet_listener {
+    #port =
+  }
+}
+
+# Enable director for the wanted login services by telling them to
+# connect to director socket instead of the default login socket:
+service imap-login {
+  #executable = imap-login director
+}
+service pop3-login {
+  #executable = pop3-login director
+}
+
+# Enable director for LMTP proxying:
+#protocol lmtp {
+#  #auth_socket_path = director-userdb
+#}

Dovecot/conf.d/10-logging.conf

@@ -0,0 +1,84 @@
+##
+## Log destination.
+##
+
+# Log file to use for error messages. "syslog" logs to syslog,
+# /dev/stderr logs to stderr.
+#log_path = syslog
+
+# Log file to use for informational messages. Defaults to log_path.
+#info_log_path =
+# Log file to use for debug messages. Defaults to info_log_path.
+#debug_log_path =
+
+# Syslog facility to use if you're logging to syslog. Usually if you don't
+# want to use "mail", you'll use local0..local7. Also other standard
+# facilities are supported.
+#syslog_facility = mail
+
+##
+## Logging verbosity and debugging.
+##
+
+# Log unsuccessful authentication attempts and the reasons why they failed.
+#auth_verbose = no
+
+# In case of password mismatches, log the attempted password. Valid values are
+# no, plain and sha1. sha1 can be useful for detecting brute force password
+# attempts vs. user simply trying the same password over and over again.
+# You can also truncate the value to n chars by appending ":n" (e.g. sha1:6).
+#auth_verbose_passwords = no
+
+# Even more verbose logging for debugging purposes. Shows for example SQL
+# queries.
+#auth_debug = no
+
+# In case of password mismatches, log the passwords and used scheme so the
+# problem can be debugged. Enabling this also enables auth_debug.
+#auth_debug_passwords = no
+
+# Enable mail process debugging. This can help you figure out why Dovecot
+# isn't finding your mails.
+mail_debug = no
+# Show protocol level SSL errors.
+#verbose_ssl = no
+
+# mail_log plugin provides more event logging for mail processes.
+plugin {
+  # Events to log. Also available: flag_change append
+  #mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename
+  # Available fields: uid, box, msgid, from, subject, size, vsize, flags
+  # size and vsize are available only for expunge and copy events.
+  #mail_log_fields = uid box msgid size
+}
+
+##
+## Log formatting.
+##
+
+# Prefix for each line written to log file. % codes are in strftime(3)
+# format.
+#log_timestamp = "%b %d %H:%M:%S "
+
+# Space-separated list of elements we want to log. The elements which have
+# a non-empty variable value are joined together to form a comma-separated
+# string.
+#login_log_format_elements = user=<%u> method=%m rip=%r lip=%l mpid=%e %c
+
+# Login log format. %s contains login_log_format_elements string, %$ contains
+# the data we want to log.
+#login_log_format = %$: %s
+
+# Log prefix for mail processes. See doc/wiki/Variables.txt for list of
+# possible variables you can use.
+#mail_log_prefix = "%s(%u): "
+
+# Format to use for logging mail deliveries. See doc/wiki/Variables.txt for
+# list of all variables you can use. Some of the common ones include:
+#  %$ - Delivery status message (e.g. "saved to INBOX")
+#  %m - Message-ID
+#  %s - Subject
+#  %f - From address
+#  %p - Physical size
+#  %w - Virtual size
+#deliver_log_format = msgid=%m: %$

Dovecot/conf.d/10-mail.conf

@@ -0,0 +1,385 @@
+##
+## Mailbox locations and namespaces
+##
+
+# Location for users' mailboxes. The default is empty, which means that Dovecot
+# tries to find the mailboxes automatically. This won't work if the user
+# doesn't yet have any mail, so you should explicitly tell Dovecot the full
+# location.
+#
+# If you're using mbox, giving a path to the INBOX file (eg. /var/mail/%u)
+# isn't enough. You'll also need to tell Dovecot where the other mailboxes are
+# kept. This is called the "root mail directory", and it must be the first
+# path given in the mail_location setting.
+#
+# There are a few special variables you can use, eg.:
+#
+#   %u - username
+#   %n - user part in user@domain, same as %u if there's no domain
+#   %d - domain part in user@domain, empty if there's no domain
+#   %h - home directory
+#
+# See doc/wiki/Variables.txt for full list. Some examples:
+#
+#   mail_location = maildir:~/Maildir
+#   mail_location = mbox:~/mail:INBOX=/var/mail/%u
+#   mail_location = mbox:/var/mail/%d/%1n/%n:INDEX=/var/indexes/%d/%1n/%n
+#
+# <doc/wiki/MailLocation.txt>
+#
+mail_location = mbox:~/mail:INBOX=/var/mail/%u
+
+# If you need to set multiple mailbox locations or want to change default
+# namespace settings, you can do it by defining namespace sections.
+#
+# You can have private, shared and public namespaces. Private namespaces
+# are for user's personal mails. Shared namespaces are for accessing other
+# users' mailboxes that have been shared. Public namespaces are for shared
+# mailboxes that are managed by sysadmin. If you create any shared or public
+# namespaces you'll typically want to enable ACL plugin also, otherwise all
+# users can access all the shared mailboxes, assuming they have permissions
+# on filesystem level to do so.
+namespace inbox {
+  # Namespace type: private, shared or public
+  #type = private
+
+  # Hierarchy separator to use. You should use the same separator for all
+  # namespaces or some clients get confused. '/' is usually a good one.
+  # The default however depends on the underlying mail storage format.
+  #separator =
+
+  # Prefix required to access this namespace. This needs to be different for
+  # all namespaces. For example "Public/".
+  #prefix =
+
+  # Physical location of the mailbox. This is in same format as
+  # mail_location, which is also the default for it.
+  #location =
+
+  # There can be only one INBOX, and this setting defines which namespace
+  # has it.
+  inbox = yes
+
+  # If namespace is hidden, it's not advertised to clients via NAMESPACE
+  # extension. You'll most likely also want to set list=no. This is mostly
+  # useful when converting from another server with different namespaces which
+  # you want to deprecate but still keep working. For example you can create
+  # hidden namespaces with prefixes "~/mail/", "~%u/mail/" and "mail/".
+  #hidden = no
+
+  # Show the mailboxes under this namespace with LIST command. This makes the
+  # namespace visible for clients that don't support NAMESPACE extension.
+  # "children" value lists child mailboxes, but hides the namespace prefix.
+  #list = yes
+
+  # Namespace handles its own subscriptions. If set to "no", the parent
+  # namespace handles them (empty prefix should always have this as "yes")
+  #subscriptions = yes
+
+  # See 15-mailboxes.conf for definitions of special mailboxes.
+}
+
+# Example shared namespace configuration
+#namespace {
+  #type = shared
+  #separator = /
+
+  # Mailboxes are visible under "shared/user@domain/"
+  # %%n, %%d and %%u are expanded to the destination user.
+  #prefix = shared/%%u/
+
+  # Mail location for other users' mailboxes. Note that %variables and ~/
+  # expands to the logged in user's data. %%n, %%d, %%u and %%h expand to the
+  # destination user's data.
+  #location = maildir:%%h/Maildir:INDEX=~/Maildir/shared/%%u
+
+  # Use the default namespace for saving subscriptions.
+  #subscriptions = no
+
+  # List the shared/ namespace only if there are visible shared mailboxes.
+  #list = children
+#}
+# Should shared INBOX be visible as "shared/user" or "shared/user/INBOX"?
+#mail_shared_explicit_inbox = no
+
+# System user and group used to access mails. If you use multiple, userdb
+# can override these by returning uid or gid fields. You can use either numbers
+# or names. <doc/wiki/UserIds.txt>
+#mail_uid =
+#mail_gid =
+
+# Group to enable temporarily for privileged operations. Currently this is
+# used only with INBOX when either its initial creation or dotlocking fails.
+# Typically this is set to "mail" to give access to /var/mail.
+#mail_privileged_group =
+
+# Grant access to these supplementary groups for mail processes. Typically
+# these are used to set up access to shared mailboxes. Note that it may be
+# dangerous to set these if users can create symlinks (e.g. if "mail" group is
+# set here, ln -s /var/mail ~/mail/var could allow a user to delete others'
+# mailboxes, or ln -s /secret/shared/box ~/mail/mybox would allow reading it).
+#mail_access_groups =
+
+# Allow full filesystem access to clients. There's no access checks other than
+# what the operating system does for the active UID/GID. It works with both
+# maildir and mboxes, allowing you to prefix mailboxes names with eg. /path/
+# or ~user/.
+#mail_full_filesystem_access = no
+
+# Dictionary for key=value mailbox attributes. This is used for example by
+# URLAUTH and METADATA extensions.
+#mail_attribute_dict =
+
+# A comment or note that is associated with the server. This value is
+# accessible for authenticated users through the IMAP METADATA server
+# entry "/shared/comment".
+#mail_server_comment = ""
+
+# Indicates a method for contacting the server administrator. According to
+# RFC 5464, this value MUST be a URI (e.g., a mailto: or tel: URL), but that
+# is currently not enforced. Use for example mailto:admin@example.com. This
+# value is accessible for authenticated users through the IMAP METADATA server
+# entry "/shared/admin".
+#mail_server_admin =
+
+##
+## Mail processes
+##
+
+# Don't use mmap() at all. This is required if you store indexes to shared
+# filesystems (NFS or clustered filesystem).
+#mmap_disable = no
+
+# Rely on O_EXCL to work when creating dotlock files. NFS supports O_EXCL
+# since version 3, so this should be safe to use nowadays by default.
+#dotlock_use_excl = yes
+
+# When to use fsync() or fdatasync() calls:
+#   optimized (default): Whenever necessary to avoid losing important data
+#   always: Useful with e.g. NFS when write()s are delayed
+#   never: Never use it (best performance, but crashes can lose data)
+#mail_fsync = optimized
+
+# Locking method for index files. Alternatives are fcntl, flock and dotlock.
+# Dotlocking uses some tricks which may create more disk I/O than other locking
+# methods. NFS users: flock doesn't work, remember to change mmap_disable.
+#lock_method = fcntl
+
+# Directory in which LDA/LMTP temporarily stores incoming mails >128 kB.
+#mail_temp_dir = /tmp
+
+# Valid UID range for users, defaults to 500 and above. This is mostly
+# to make sure that users can't log in as daemons or other system users.
+# Note that denying root logins is hardcoded to dovecot binary and can't
+# be done even if first_valid_uid is set to 0.
+#first_valid_uid = 500
+#last_valid_uid = 0
+
+# Valid GID range for users, defaults to non-root/wheel. Users having
+# non-valid GID as primary group ID aren't allowed to log in. If user
+# belongs to supplementary groups with non-valid GIDs, those groups are
+# not set.
+#first_valid_gid = 1
+#last_valid_gid = 0
+
+# Maximum allowed length for mail keyword name. It's only forced when trying
+# to create new keywords.
+#mail_max_keyword_length = 50
+
+# ':' separated list of directories under which chrooting is allowed for mail
+# processes (ie. /var/mail will allow chrooting to /var/mail/foo/bar too).
+# This setting doesn't affect login_chroot, mail_chroot or auth chroot
+# settings. If this setting is empty, "/./" in home dirs are ignored.
+# WARNING: Never add directories here which local users can modify, that
+# may lead to root exploit. Usually this should be done only if you don't
+# allow shell access for users. <doc/wiki/Chrooting.txt>
+#valid_chroot_dirs =
+
+# Default chroot directory for mail processes. This can be overridden for
+# specific users in user database by giving /./ in user's home directory
+# (eg. /home/./user chroots into /home). Note that usually there is no real
+# need to do chrooting, Dovecot doesn't allow users to access files outside
+# their mail directory anyway. If your home directories are prefixed with
+# the chroot directory, append "/." to mail_chroot. <doc/wiki/Chrooting.txt>
+#mail_chroot =
+
+# UNIX socket path to master authentication server to find users.
+# This is used by imap (for shared users) and lda.
+#auth_socket_path = /var/run/dovecot/auth-userdb
+
+# Directory where to look up mail plugins.
+#mail_plugin_dir = /usr/lib/dovecot/modules
+
+# Space separated list of plugins to load for all services. Plugins specific to
+# IMAP, LDA, etc. are added to this list in their own .conf files.
+#mail_plugins =
+
+##
+## Mailbox handling optimizations
+##
+
+# Mailbox list indexes can be used to optimize IMAP STATUS commands. They are
+# also required for IMAP NOTIFY extension to be enabled.
+#mailbox_list_index = no
+
+# The minimum number of mails in a mailbox before updates are done to cache
+# file. This allows optimizing Dovecot's behavior to do less disk writes at
+# the cost of more disk reads.
+#mail_cache_min_mail_count = 0
+
+# When IDLE command is running, mailbox is checked once in a while to see if
+# there are any new mails or other changes. This setting defines the minimum
+# time to wait between those checks. Dovecot can also use inotify and
+# kqueue to find out immediately when changes occur.
+#mailbox_idle_check_interval = 30 secs
+
+# Save mails with CR+LF instead of plain LF. This makes sending those mails
+# take less CPU, especially with sendfile() syscall with Linux and FreeBSD.
+# But it also creates a bit more disk I/O which may just make it slower.
+# Also note that if other software reads the mboxes/maildirs, they may handle
+# the extra CRs wrong and cause problems.
+#mail_save_crlf = no
+
+# Max number of mails to keep open and prefetch to memory. This only works with
+# some mailbox formats and/or operating systems.
+#mail_prefetch_count = 0
+
+# How often to scan for stale temporary files and delete them (0 = never).
+# These should exist only after Dovecot dies in the middle of saving mails.
+#mail_temp_scan_interval = 1w
+
+##
+## Maildir-specific settings
+##
+
+# By default LIST command returns all entries in maildir beginning with a dot.
+# Enabling this option makes Dovecot return only entries which are directories.
+# This is done by stat()ing each entry, so it causes more disk I/O.
+# (For systems setting struct dirent->d_type, this check is free and it's
+# done always regardless of this setting)
+#maildir_stat_dirs = no
+
+# When copying a message, do it with hard links whenever possible. This makes
+# the performance much better, and it's unlikely to have any side effects.
+#maildir_copy_with_hardlinks = yes
+
+# Assume Dovecot is the only MUA accessing Maildir: Scan cur/ directory only
+# when its mtime changes unexpectedly or when we can't find the mail otherwise.
+#maildir_very_dirty_syncs = no
+
+# If enabled, Dovecot doesn't use the S=<size> in the Maildir filenames for
+# getting the mail's physical size, except when recalculating Maildir++ quota.
+# This can be useful in systems where a lot of the Maildir filenames have a
+# broken size. The performance hit for enabling this is very small.
+#maildir_broken_filename_sizes = no
+
+# Always move mails from new/ directory to cur/, even when the \Recent flags
+# aren't being reset.
+#maildir_empty_new = no
+
+##
+## mbox-specific settings
+##
+
+# Which locking methods to use for locking mbox. There are four available:
+#  dotlock: Create <mailbox>.lock file. This is the oldest and most NFS-safe
+#           solution. If you want to use /var/mail/ like directory, the users
+#           will need write access to that directory.
+#  dotlock_try: Same as dotlock, but if it fails because of permissions or
+#               because there isn't enough disk space, just skip it.
+#  fcntl  : Use this if possible. Works with NFS too if lockd is used.
+#  flock  : May not exist in all systems. Doesn't work with NFS.
+#  lockf  : May not exist in all systems. Doesn't work with NFS.
+#
+# You can use multiple locking methods; if you do the order they're declared
+# in is important to avoid deadlocks if other MTAs/MUAs are using multiple
+# locking methods as well. Some operating systems don't allow using some of
+# them simultaneously.
+#
+# The Debian value for mbox_write_locks differs from upstream Dovecot. It is
+# changed to be compliant with Debian Policy (section 11.6) for NFS safety.
+#       Dovecot: mbox_write_locks = dotlock fcntl
+#       Debian:  mbox_write_locks = fcntl dotlock
+#
+#mbox_read_locks = fcntl
+#mbox_write_locks = fcntl dotlock
+
+# Maximum time to wait for lock (all of them) before aborting.
+#mbox_lock_timeout = 5 mins
+
+# If dotlock exists but the mailbox isn't modified in any way, override the
+# lock file after this much time.
+#mbox_dotlock_change_timeout = 2 mins
+
+# When mbox changes unexpectedly we have to fully read it to find out what
+# changed. If the mbox is large this can take a long time. Since the change
+# is usually just a newly appended mail, it'd be faster to simply read the
+# new mails. If this setting is enabled, Dovecot does this but still safely
+# fallbacks to re-reading the whole mbox file whenever something in mbox isn't
+# how it's expected to be. The only real downside to this setting is that if
+# some other MUA changes message flags, Dovecot doesn't notice it immediately.
+# Note that a full sync is done with SELECT, EXAMINE, EXPUNGE and CHECK
+# commands.
+#mbox_dirty_syncs = yes
+
+# Like mbox_dirty_syncs, but don't do full syncs even with SELECT, EXAMINE,
+# EXPUNGE or CHECK commands. If this is set, mbox_dirty_syncs is ignored.
+#mbox_very_dirty_syncs = no
+
+# Delay writing mbox headers until doing a full write sync (EXPUNGE and CHECK
+# commands and when closing the mailbox). This is especially useful for POP3
+# where clients often delete all mails. The downside is that our changes
+# aren't immediately visible to other MUAs.
+#mbox_lazy_writes = yes
+
+# If mbox size is smaller than this (e.g. 100k), don't write index files.
+# If an index file already exists it's still read, just not updated.
+#mbox_min_index_size = 0
+
+# Mail header selection algorithm to use for MD5 POP3 UIDLs when
+# pop3_uidl_format=%m. For backwards compatibility we use apop3d inspired
+# algorithm, but it fails if the first Received: header isn't unique in all
+# mails. An alternative algorithm is "all" that selects all headers.
+#mbox_md5 = apop3d
+
+##
+## mdbox-specific settings
+##
+
+# Maximum dbox file size until it's rotated.
+#mdbox_rotate_size = 2M
+
+# Maximum dbox file age until it's rotated. Typically in days. Day begins
+# from midnight, so 1d = today, 2d = yesterday, etc. 0 = check disabled.
+#mdbox_rotate_interval = 0
+
+# When creating new mdbox files, immediately preallocate their size to
+# mdbox_rotate_size. This setting currently works only in Linux with some
+# filesystems (ext4, xfs).
+#mdbox_preallocate_space = no
+
+##
+## Mail attachments
+##
+
+# sdbox and mdbox support saving mail attachments to external files, which
+# also allows single instance storage for them. Other backends don't support
+# this for now.
+
+# Directory root where to store mail attachments. Disabled, if empty.
+#mail_attachment_dir =
+
+# Attachments smaller than this aren't saved externally. It's also possible to
+# write a plugin to disable saving specific attachments externally.
+#mail_attachment_min_size = 128k
+
+# Filesystem backend to use for saving attachments:
+#  posix : No SiS done by Dovecot (but this might help FS's own deduplication)
+#  sis posix : SiS with immediate byte-by-byte comparison during saving
+#  sis-queue posix : SiS with delayed comparison and deduplication
+#mail_attachment_fs = sis posix
+
+# Hash format to use in attachment filenames. You can add any text and
+# variables: %{md4}, %{md5}, %{sha1}, %{sha256}, %{sha512}, %{size}.
+# Variables can be truncated, e.g. %{sha256:80} returns only first 80 bits
+#mail_attachment_hash = %{sha1}

Dovecot/conf.d/10-master.conf

@@ -0,0 +1,121 @@
+#default_process_limit = 100
+#default_client_limit = 1000
+
+# Default VSZ (virtual memory size) limit for service processes. This is mainly
+# intended to catch and kill processes that leak memory before they eat up
+# everything.
+#default_vsz_limit = 256M
+
+# Login user is internally used by login processes. This is the most untrusted
+# user in Dovecot system. It shouldn't have access to anything at all.
+#default_login_user = dovenull
+
+# Internal user is used by unprivileged processes. It should be separate from
+# login user, so that login processes can't disturb other processes.
+#default_internal_user = dovecot
+
+service imap-login {
+  inet_listener imap {
+    #port = 143
+  }
+  inet_listener imaps {
+    #port = 993
+    #ssl = yes
+  }
+
+  # Number of connections to handle before starting a new process. Typically
+  # the only useful values are 0 (unlimited) or 1. 1 is more secure, but 0
+  # is faster. <doc/wiki/LoginProcess.txt>
+  #service_count = 1
+
+  # Number of processes to always keep waiting for more connections.
+  #process_min_avail = 0
+
+  # If you set service_count=0, you probably need to grow this.
+  #vsz_limit = $default_vsz_limit
+}
+
+service pop3-login {
+  inet_listener pop3 {
+    #port = 110
+  }
+  inet_listener pop3s {
+    #port = 995
+    #ssl = yes
+  }
+}
+
+service lmtp {
+  unix_listener /var/spool/postfix/private/dovecot-lmtp {
+    mode = 0666
+    user = postfix
+    group = postfix
+  }
+
+  # Create inet listener only if you can't use the above UNIX socket
+  #inet_listener lmtp {
+    # Avoid making LMTP visible for the entire internet
+    #address =
+    #port =
+  #}
+}
+
+service imap {
+  # Most of the memory goes to mmap()ing files. You may need to increase this
+  # limit if you have huge mailboxes.
+  #vsz_limit = $default_vsz_limit
+
+  # Max. number of IMAP processes (connections)
+  #process_limit = 1024
+}
+
+service pop3 {
+  # Max. number of POP3 processes (connections)
+  #process_limit = 1024
+}
+
+service auth {
+  # auth_socket_path points to this userdb socket by default. It's typically
+  # used by dovecot-lda, doveadm, possibly imap process, etc. Users that have
+  # full permissions to this socket are able to get a list of all usernames and
+  # get the results of everyone's userdb lookups.
+  #
+  # The default 0666 mode allows anyone to connect to the socket, but the
+  # userdb lookups will succeed only if the userdb returns an "uid" field that
+  # matches the caller process's UID. Also if caller's uid or gid matches the
+  # socket's uid or gid the lookup succeeds. Anything else causes a failure.
+  #
+  # To give the caller full permissions to lookup all users, set the mode to
+  # something else than 0666 and Dovecot lets the kernel enforce the
+  # permissions (e.g. 0777 allows everyone full permissions).
+  unix_listener auth-userdb {
+    #mode = 0666
+    #user =
+    #group =
+  }
+
+  # Postfix smtp-auth
+  #unix_listener /var/spool/postfix/private/auth {
+  #  mode = 0666
+  #}
+
+  # Auth process is run as this user.
+  #user = $default_internal_user
+}
+
+service auth-worker {
+  # Auth worker process is run as root by default, so that it can access
+  # /etc/shadow. If this isn't necessary, the user should be changed to
+  # $default_internal_user.
+  #user = root
+}
+
+service dict {
+  # If dict proxy is used, mail processes should have access to its socket.
+  # For example: mode=0660, group=vmail and global mail_access_groups=vmail
+  unix_listener dict {
+    #mode = 0600
+    #user =
+    #group =
+  }
+}

Dovecot/conf.d/10-ssl.conf

@@ -0,0 +1,67 @@
+##
+## SSL settings
+##
+
+# SSL/TLS support: yes, no, required. <doc/wiki/SSL.txt>
+ssl = yes
+
+# PEM encoded X.509 SSL/TLS certificate and private key. They're opened before
+# dropping root privileges, so keep the key file unreadable by anyone but
+# root. Included doc/mkcert.sh can be used to easily generate self-signed
+# certificate, just make sure to update the domains in dovecot-openssl.cnf
+ssl_cert = </etc/dovecot/private/dovecot.crt
+ssl_key = </etc/dovecot/private/dovecot.pem
+ssl_ca = </etc/dovecot/private/globalsign-dv.crt
+
+
+
+# If key file is password protected, give the password here. Alternatively
+# give it when starting dovecot with -p parameter. Since this file is often
+# world-readable, you may want to place this setting instead to a different
+# root owned 0600 file by using ssl_key_password = <path.
+#ssl_key_password =
+
+# PEM encoded trusted certificate authority. Set this only if you intend to use
+# ssl_verify_client_cert=yes. The file should contain the CA certificate(s)
+# followed by the matching CRL(s). (e.g. ssl_ca = </etc/ssl/certs/ca.pem)
+#ssl_ca =
+
+# Require that CRL check succeeds for client certificates.
+#ssl_require_crl = yes
+
+# Directory and/or file for trusted SSL CA certificates. These are used only
+# when Dovecot needs to act as an SSL client (e.g. imapc backend). The
+# directory is usually /etc/ssl/certs in Debian-based systems and the file is
+# /etc/pki/tls/cert.pem in RedHat-based systems.
+#ssl_client_ca_dir =
+#ssl_client_ca_file =
+
+# Request client to send a certificate. If you also want to require it, set
+# auth_ssl_require_client_cert=yes in auth section.
+#ssl_verify_client_cert = no
+
+# Which field from certificate to use for username. commonName and
+# x500UniqueIdentifier are the usual choices. You'll also need to set
+# auth_ssl_username_from_cert=yes.
+#ssl_cert_username_field = commonName
+
+# DH parameters length to use.
+#ssl_dh_parameters_length = 1024
+
+# SSL protocols to use
+ssl_protocols = !SSLv3 !TLSv1 !TLSv1.1
+
+# SSL ciphers to use
+#ssl_cipher_list = ALL:!LOW:!SSLv2:!EXP:!aNULL
+
+# Prefer the server's order of ciphers over client's.
+ssl_prefer_server_ciphers = no
+
+# SSL crypto device to use, for valid values run "openssl engine"
+#ssl_crypto_device =
+
+# SSL extra options. Currently supported options are:
+#   no_compression - Disable compression.
+#ssl_options =
+
+ssl_cipher_list = ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384

Dovecot/conf.d/10-tcpwrapper.conf

@@ -0,0 +1,14 @@
+# 10-tcpwrapper.conf
+#
+# service name for hosts.{allow|deny} are those defined as
+# inet_listener in master.conf
+#
+#login_access_sockets = tcpwrap
+#
+#service tcpwrap {
+#  unix_listener login/tcpwrap {
+#    group = $default_login_user
+#    mode = 0600
+#    user = $default_login_user
+#  }
+#}

Dovecot/conf.d/15-lda.conf

@@ -0,0 +1,48 @@
+##
+## LDA specific settings (also used by LMTP)
+##
+
+# Address to use when sending rejection mails.
+# Default is postmaster@<your domain>. %d expands to recipient domain.
+postmaster_address = postmaster@staff.libraryofcode.org.
+
+# Hostname to use in various parts of sent mails (e.g. in Message-Id) and
+# in LMTP replies. Default is the system's real hostname@domain.
+#hostname =
+
+# If user is over quota, return with temporary failure instead of
+# bouncing the mail.
+#quota_full_tempfail = no
+
+# Binary to use for sending mails.
+#sendmail_path = /usr/sbin/sendmail
+
+# If non-empty, send mails via this SMTP host[:port] instead of sendmail.
+#submission_host =
+
+# Subject: header to use for rejection mails. You can use the same variables
+# as for rejection_reason below.
+#rejection_subject = Rejected: %s
+
+# Human readable error message for rejection mails. You can use variables:
+#  %n = CRLF, %r = reason, %s = original subject, %t = recipient
+#rejection_reason = Your message to <%t> was automatically rejected:%n%r
+
+# Delimiter character between local-part and detail in email address.
+#recipient_delimiter = +
+
+# Header where the original recipient address (SMTP's RCPT TO: address) is taken
+# from if not available elsewhere. With dovecot-lda -a parameter overrides this.
+# A commonly used header for this is X-Original-To.
+#lda_original_recipient_header =
+
+# Should saving a mail to a nonexistent mailbox automatically create it?
+#lda_mailbox_autocreate = no
+
+# Should automatically created mailboxes be also automatically subscribed?
+#lda_mailbox_autosubscribe = no
+
+protocol lda {
+  #Space separated list of plugins to load (default is global mail_plugins).
+  mail_plugins = $mail_plugins
+}

Dovecot/conf.d/15-mailboxes.conf

@@ -0,0 +1,78 @@
+##
+## Mailbox definitions
+##
+
+# Each mailbox is specified in a separate mailbox section. The section name
+# specifies the mailbox name. If it has spaces, you can put the name
+# "in quotes". These sections can contain the following mailbox settings:
+#
+# auto:
+#   Indicates whether the mailbox with this name is automatically created
+#   implicitly when it is first accessed. The user can also be automatically
+#   subscribed to the mailbox after creation. The following values are
+#   defined for this setting:
+#
+#     no        - Never created automatically.
+#     create    - Automatically created, but no automatic subscription.
+#     subscribe - Automatically created and subscribed.
+#
+# special_use:
+#   A space-separated list of SPECIAL-USE flags (RFC 6154) to use for the
+#   mailbox. There are no validity checks, so you could specify anything
+#   you want in here, but it's not a good idea to use flags other than the
+#   standard ones specified in the RFC:
+#
+#     \All      - This (virtual) mailbox presents all messages in the
+#                 user's message store.
+#     \Archive  - This mailbox is used to archive messages.
+#     \Drafts   - This mailbox is used to hold draft messages.
+#     \Flagged  - This (virtual) mailbox presents all messages in the
+#                 user's message store marked with the IMAP \Flagged flag.
+#     \Junk     - This mailbox is where messages deemed to be junk mail
+#                 are held.
+#     \Sent     - This mailbox is used to hold copies of messages that
+#                 have been sent.
+#     \Trash    - This mailbox is used to hold messages that have been
+#                 deleted.
+#
+# comment:
+#   Defines a default comment or note associated with the mailbox. This
+#   value is accessible through the IMAP METADATA mailbox entries
+#   "/shared/comment" and "/private/comment". Users with sufficient
+#   privileges can override the default value for entries with a custom
+#   value.
+
+# NOTE: Assumes "namespace inbox" has been defined in 10-mail.conf.
+namespace inbox {
+  # These mailboxes are widely used and could perhaps be created automatically:
+  mailbox Drafts {
+    special_use = \Drafts
+  }
+  mailbox Junk {
+    special_use = \Junk
+  }
+  mailbox Trash {
+    special_use = \Trash
+  }
+
+  # For \Sent mailboxes there are two widely used names. We'll mark both of
+  # them as \Sent. User typically deletes one of them if duplicates are created.
+  mailbox Sent {
+    special_use = \Sent
+  }
+  mailbox "Sent Messages" {
+    special_use = \Sent
+  }
+
+  # If you have a virtual "All messages" mailbox:
+  #mailbox virtual/All {
+  #  special_use = \All
+  #  comment = All my messages
+  #}
+
+  # If you have a virtual "Flagged" mailbox:
+  #mailbox virtual/Flagged {
+  #  special_use = \Flagged
+  #  comment = All my flagged messages
+  #}
+}

Dovecot/conf.d/20-imap.conf

@@ -0,0 +1,75 @@
+##
+## IMAP specific settings
+##
+
+# If nothing happens for this long while client is IDLEing, move the connection
+# to imap-hibernate process and close the old imap process. This saves memory,
+# because connections use very little memory in imap-hibernate process. The
+# downside is that recreating the imap process back uses some resources.
+#imap_hibernate_timeout = 0
+
+# Maximum IMAP command line length. Some clients generate very long command
+# lines with huge mailboxes, so you may need to raise this if you get
+# "Too long argument" or "IMAP command line too large" errors often.
+#imap_max_line_length = 64k
+
+# IMAP logout format string:
+#  %i - total number of bytes read from client
+#  %o - total number of bytes sent to client
+#  %{fetch_hdr_count} - Number of mails with mail header data sent to client
+#  %{fetch_hdr_bytes} - Number of bytes with mail header data sent to client
+#  %{fetch_body_count} - Number of mails with mail body data sent to client
+#  %{fetch_body_bytes} - Number of bytes with mail body data sent to client
+#  %{deleted} - Number of mails where client added \Deleted flag
+#  %{expunged} - Number of mails that client expunged
+#  %{trashed} - Number of mails that client copied/moved to the
+#               special_use=\Trash mailbox.
+#imap_logout_format = in=%i out=%o
+
+# Override the IMAP CAPABILITY response. If the value begins with '+',
+# add the given capabilities on top of the defaults (e.g. +XFOO XBAR).
+#imap_capability =
+
+# How long to wait between "OK Still here" notifications when client is
+# IDLEing.
+#imap_idle_notify_interval = 2 mins
+
+# ID field names and values to send to clients. Using * as the value makes
+# Dovecot use the default value. The following fields have default values
+# currently: name, version, os, os-version, support-url, support-email.
+#imap_id_send =
+
+# ID fields sent by client to log. * means everything.
+#imap_id_log =
+
+# Workarounds for various client bugs:
+#   delay-newmail:
+#     Send EXISTS/RECENT new mail notifications only when replying to NOOP
+#     and CHECK commands. Some clients ignore them otherwise, for example OSX
+#     Mail (<v2.1). Outlook Express breaks more badly though, without this it
+#     may show user "Message no longer in server" errors. Note that OE6 still
+#     breaks even with this workaround if synchronization is set to
+#     "Headers Only".
+#   tb-extra-mailbox-sep:
+#     Thunderbird gets somehow confused with LAYOUT=fs (mbox and dbox) and
+#     adds extra '/' suffixes to mailbox names. This option causes Dovecot to
+#     ignore the extra '/' instead of treating it as invalid mailbox name.
+#   tb-lsub-flags:
+#     Show \Noselect flags for LSUB replies with LAYOUT=fs (e.g. mbox).
+#     This makes Thunderbird realize they aren't selectable and show them
+#     greyed out, instead of only later giving "not selectable" popup error.
+#
+# The list is space-separated.
+#imap_client_workarounds =
+
+# Host allowed in URLAUTH URLs sent by client. "*" allows all.
+#imap_urlauth_host =
+
+protocol imap {
+  # Space separated list of plugins to load (default is global mail_plugins).
+  #mail_plugins = $mail_plugins
+
+  # Maximum number of IMAP connections allowed for a user from each IP address.
+  # NOTE: The username is compared case-sensitively.
+  #mail_max_userip_connections = 10
+}

Dovecot/conf.d/20-lmtp.conf

@@ -0,0 +1,15 @@
+service lmtp {
+   inet_listener lmtp {
+      address = 127.0.0.1 ::1
+      port = 24
+   }
+
+   unix_listener lmtp {
+      #mode = 0666
+   }
+}
+
+protocol lmtp {
+  info_log_path = /var/log/mail/lmtp.log
+  mail_plugins = "sieve"
+}

Dovecot/conf.d/20-managesieve.conf

@@ -0,0 +1,76 @@
+##
+## ManageSieve specific settings
+##
+
+# Uncomment to enable managesieve protocol:
+#protocols = $protocols sieve
+
+# Service definitions
+
+#service managesieve-login {
+  #inet_listener sieve {
+  #  port = 4190
+  #}
+
+  #inet_listener sieve_deprecated {
+  #  port = 2000
+  #}
+
+  # Number of connections to handle before starting a new process. Typically
+  # the only useful values are 0 (unlimited) or 1. 1 is more secure, but 0
+  # is faster. <doc/wiki/LoginProcess.txt>
+  #service_count = 1
+
+  # Number of processes to always keep waiting for more connections.
+  #process_min_avail = 0
+
+  # If you set service_count=0, you probably need to grow this.
+  #vsz_limit = 64M
+#}
+
+#service managesieve {
+  # Max. number of ManageSieve processes (connections)
+  #process_limit = 1024
+#}
+
+# Service configuration
+
+protocol sieve {
+  # Maximum ManageSieve command line length in bytes. ManageSieve usually does
+  # not involve overly long command lines, so this setting will not normally
+  # need adjustment
+  #managesieve_max_line_length = 65536
+
+  # Maximum number of ManageSieve connections allowed for a user from each IP
+  # address.
+  # NOTE: The username is compared case-sensitively.
+  #mail_max_userip_connections = 10
+
+  # Space separated list of plugins to load (none known to be useful so far).
+  # Do NOT try to load IMAP plugins here.
+  #mail_plugins =
+
+  # MANAGESIEVE logout format string:
+  #  %i - total number of bytes read from client
+  #  %o - total number of bytes sent to client
+  #managesieve_logout_format = bytes=%i/%o
+
+  # To fool ManageSieve clients that are focused on CMU's timesieved you can
+  # specify the IMPLEMENTATION capability that Dovecot reports to clients.
+  # For example: 'Cyrus timsieved v2.2.13'
+  #managesieve_implementation_string = Dovecot Pigeonhole
+
+  # Explicitly specify the SIEVE and NOTIFY capability reported by the server
+  # before login. If left unassigned these will be reported dynamically
+  # according to what the Sieve interpreter supports by default (after login
+  # this may differ depending on the user).
+  #managesieve_sieve_capability =
+  #managesieve_notify_capability =
+
+  # The maximum number of compile errors that are returned to the client upon
+  # script upload or script verification.
+  #managesieve_max_compile_errors = 5
+
+  # Refer to 90-sieve.conf for script quota configuration and configuration of
+  # Sieve execution limits.
+}

Dovecot/conf.d/20-pop3.conf

@@ -0,0 +1,99 @@
+##
+## POP3 specific settings
+##
+
+# Don't try to set mails non-recent or seen with POP3 sessions. This is
+# mostly intended to reduce disk I/O. With maildir it doesn't move files
+# from new/ to cur/, with mbox it doesn't write Status-header.
+#pop3_no_flag_updates = no
+
+# Support LAST command which exists in old POP3 specs, but has been removed
+# from new ones. Some clients still wish to use this though. Enabling this
+# makes RSET command clear all \Seen flags from messages.
+#pop3_enable_last = no
+
+# If mail has X-UIDL header, use it as the mail's UIDL.
+#pop3_reuse_xuidl = no
+
+# Allow only one POP3 session to run simultaneously for the same user.
+#pop3_lock_session = no
+
+# POP3 requires message sizes to be listed as if they had CR+LF linefeeds.
+# Many POP3 servers violate this by returning the sizes with LF linefeeds,
+# because it's faster to get. When this setting is enabled, Dovecot still
+# tries to do the right thing first, but if that requires opening the
+# message, it fallbacks to the easier (but incorrect) size.
+#pop3_fast_size_lookups = no
+
+# POP3 UIDL (unique mail identifier) format to use. You can use following
+# variables, along with the variable modifiers described in
+# doc/wiki/Variables.txt (e.g. %Uf for the filename in uppercase)
+#
+#  %v - Mailbox's IMAP UIDVALIDITY
+#  %u - Mail's IMAP UID
+#  %m - MD5 sum of the mailbox headers in hex (mbox only)
+#  %f - filename (maildir only)
+#  %g - Mail's GUID
+#
+# If you want UIDL compatibility with other POP3 servers, use:
+#  UW's ipop3d         : %08Xv%08Xu
+#  Courier             : %f or %v-%u (both might be used simultaneosly)
+#  Cyrus (<= 2.1.3)    : %u
+#  Cyrus (>= 2.1.4)    : %v.%u
+#  Dovecot v0.99.x     : %v.%u
+#  tpop3d              : %Mf
+#
+# Note that Outlook 2003 seems to have problems with %v.%u format which was
+# Dovecot's default, so if you're building a new server it would be a good
+# idea to change this. %08Xu%08Xv should be pretty fail-safe.
+#
+#pop3_uidl_format = %08Xu%08Xv
+
+# Permanently save UIDLs sent to POP3 clients, so pop3_uidl_format changes
+# won't change those UIDLs. Currently this works only with Maildir.
+#pop3_save_uidl = no
+
+# What to do about duplicate UIDLs if they exist?
+#   allow: Show duplicates to clients.
+#   rename: Append a temporary -2, -3, etc. counter after the UIDL.
+#pop3_uidl_duplicates = allow
+
+# This option changes POP3 behavior so that it's not possible to actually
+# delete mails via POP3, only hide them from future POP3 sessions. The mails
+# will still be counted towards user's quota until actually deleted via IMAP.
+# Use e.g. "$POP3Deleted" as the value (it will be visible as IMAP keyword).
+# Make sure you can legally archive mails before enabling this setting.
+#pop3_deleted_flag =
+
+# POP3 logout format string:
+#  %i - total number of bytes read from client
+#  %o - total number of bytes sent to client
+#  %t - number of TOP commands
+#  %p - number of bytes sent to client as a result of TOP command
+#  %r - number of RETR commands
+#  %b - number of bytes sent to client as a result of RETR command
+#  %d - number of deleted messages
+#  %{deleted_bytes} - number of bytes in deleted messages
+#  %m - number of messages (before deletion)
+#  %s - mailbox size in bytes (before deletion)
+#  %u - old/new UIDL hash. may help finding out if UIDLs changed unexpectedly
+#pop3_logout_format = top=%t/%p, retr=%r/%b, del=%d/%m, size=%s
+
+# Workarounds for various client bugs:
+#   outlook-no-nuls:
+#     Outlook and Outlook Express hang if mails contain NUL characters.
+#     This setting replaces them with 0x80 character.
+#   oe-ns-eoh:
+#     Outlook Express and Netscape Mail breaks if end of headers-line is
+#     missing. This option simply sends it if it's missing.
+# The list is space-separated.
+#pop3_client_workarounds =
+
+protocol pop3 {
+  # Space separated list of plugins to load (default is global mail_plugins).
+  #mail_plugins = $mail_plugins
+
+  # Maximum number of POP3 connections allowed for a user from each IP address.
+  # NOTE: The username is compared case-sensitively.
+  #mail_max_userip_connections = 10
+}

Dovecot/conf.d/90-acl.conf

@@ -0,0 +1,19 @@
+##
+## Mailbox access control lists.
+##
+
+# vfile backend reads ACLs from "dovecot-acl" file from mail directory.
+# You can also optionally give a global ACL directory path where ACLs are
+# applied to all users' mailboxes. The global ACL directory contains
+# one file for each mailbox, eg. INBOX or sub.mailbox. cache_secs parameter
+# specifies how many seconds to wait between stat()ing dovecot-acl file
+# to see if it changed.
+plugin {
+  #acl = vfile:/etc/dovecot/global-acls:cache_secs=300
+}
+
+# To let users LIST mailboxes shared by other users, Dovecot needs a
+# shared mailbox dictionary. For example:
+plugin {
+  #acl_shared_dict = file:/var/lib/dovecot/shared-mailboxes
+}

Dovecot/conf.d/90-plugin.conf

@@ -0,0 +1,18 @@
+##
+## Plugin settings
+##
+
+# All wanted plugins must be listed in mail_plugins setting before any of the
+# settings take effect. See <doc/wiki/Plugins.txt> for list of plugins and
+# their configuration. Note that %variable expansion is done for all values.
+
+plugin {
+  #setting_name = value
+}
+
+plugin {
+  sieve_plugins = sieve_mapsieve sieve_extprograms
+  imapsieve_mailbox1_name = INBOX
+  imapsieve_mailbox1_before = file:/etc/dovecot/sieve/default.sieve
+  sieve_global_extensions = +vnd.dovecot.environment
+}

Dovecot/conf.d/90-quota.conf

@@ -0,0 +1,80 @@
+##
+## Quota configuration.
+##
+
+# Note that you also have to enable quota plugin in mail_plugins setting.
+# <doc/wiki/Quota.txt>
+
+##
+## Quota limits
+##
+
+# Quota limits are set using "quota_rule" parameters. To get per-user quota
+# limits, you can set/override them by returning "quota_rule" extra field
+# from userdb. It's also possible to give mailbox-specific limits, for example
+# to give additional 100 MB when saving to Trash:
+
+plugin {
+  #quota_rule = *:storage=1G
+  #quota_rule2 = Trash:storage=+100M
+
+  # LDA/LMTP allows saving the last mail to bring user from under quota to
+  # over quota, if the quota doesn't grow too high. Default is to allow as
+  # long as quota will stay under 10% above the limit. Also allowed e.g. 10M.
+  #quota_grace = 10%%
+}
+
+##
+## Quota warnings
+##
+
+# You can execute a given command when user exceeds a specified quota limit.
+# Each quota root has separate limits. Only the command for the first
+# exceeded limit is excecuted, so put the highest limit first.
+# The commands are executed via script service by connecting to the named
+# UNIX socket (quota-warning below).
+# Note that % needs to be escaped as %%, otherwise "% " expands to empty.
+
+plugin {
+  #quota_warning = storage=95%% quota-warning 95 %u
+  #quota_warning2 = storage=80%% quota-warning 80 %u
+}
+
+# Example quota-warning service. The unix listener's permissions should be
+# set in a way that mail processes can connect to it. Below example assumes
+# that mail processes run as vmail user. If you use mode=0666, all system users
+# can generate quota warnings to anyone.
+#service quota-warning {
+#  executable = script /usr/local/bin/quota-warning.sh
+#  user = dovecot
+#  unix_listener quota-warning {
+#    user = vmail
+#  }
+#}
+
+##
+## Quota backends
+##
+
+# Multiple backends are supported:
+#   dirsize: Find and sum all the files found from mail directory.
+#            Extremely SLOW with Maildir. It'll eat your CPU and disk I/O.
+#   dict: Keep quota stored in dictionary (eg. SQL)
+#   maildir: Maildir++ quota
+#   fs: Read-only support for filesystem quota
+
+plugin {
+  #quota = dirsize:User quota
+  #quota = maildir:User quota
+  #quota = dict:User quota::proxy::quota
+  #quota = fs:User quota
+}
+
+# Multiple quota roots are also possible, for example this gives each user
+# their own 100MB quota and one shared 1GB quota within the domain:
+plugin {
+  #quota = dict:user::proxy::quota
+  #quota2 = dict:domain:%d:proxy::quota_domain
+  #quota_rule = *:storage=102400
+  #quota2_rule = *:storage=1048576
+}

Dovecot/conf.d/90-sieve-extprograms.conf

@@ -0,0 +1,43 @@
+# Sieve Extprograms plugin configuration
+
+# Don't forget to add the sieve_extprograms plugin to the sieve_plugins setting.
+# Also enable the extensions you need (one or more of vnd.dovecot.pipe,
+# vnd.dovecot.filter and vnd.dovecot.execute) by adding these   to the
+# sieve_extensions or sieve_global_extensions settings. Restricting these
+# extensions to a global context using sieve_global_extensions is recommended.
+
+plugin {
+
+  # The directory where the program sockets are located for the
+  # vnd.dovecot.pipe, vnd.dovecot.filter and vnd.dovecot.execute extension
+  # respectively. The name of each unix socket contained in that directory
+  # directly maps to a program-name referenced from the Sieve script.
+  #sieve_pipe_socket_dir = sieve-pipe
+  #sieve_filter_socket_dir = sieve-filter
+  #sieve_execute_socket_dir = sieve-execute
+
+  # The directory where the scripts are located for direct execution by the
+  # vnd.dovecot.pipe, vnd.dovecot.filter and vnd.dovecot.execute extension
+  # respectively. The name of each script contained in that directory
+  # directly maps to a program-name referenced from the Sieve script.
+  #sieve_pipe_bin_dir = /usr/lib/dovecot/sieve-pipe
+  #sieve_filter_bin_dir = /usr/lib/dovecot/sieve-filter
+  #sieve_execute_bin_dir = /usr/lib/dovecot/sieve-execute
+}
+
+# An example program service called 'do-something' to pipe messages to
+#service do-something {
+  # Define the executed script as parameter to the sieve service
+  #executable = script /usr/lib/dovecot/sieve-pipe/do-something.sh
+
+  # Use some unprivileged user for executing the program
+  #user = dovenull
+
+  # The unix socket located in the sieve_pipe_socket_dir (as defined in the
+  # plugin {} section above)
+  #unix_listener sieve-pipe/do-something {
+    # LDA/LMTP must have access
+  #  user = vmail
+  #  mode = 0600
+  #}
+#}

Dovecot/conf.d/90-sieve.conf

@@ -0,0 +1,215 @@
+##
+## Settings for the Sieve interpreter
+##
+
+# Do not forget to enable the Sieve plugin in 15-lda.conf and 20-lmtp.conf
+# by adding it to the respective mail_plugins= settings.
+
+# The Sieve interpreter can retrieve Sieve scripts from several types of
+# locations. The default `file' location type is a local filesystem path
+# pointing to a Sieve script file or a directory containing multiple Sieve
+# script files. More complex setups can use other location types such as
+# `ldap' or `dict' to fetch Sieve scripts from remote databases.
+#
+# All settings that specify the location of one ore more Sieve scripts accept
+# the following syntax:
+#
+# location = [<type>:]path[;<option>[=<value>][;...]]
+#
+# If the type prefix is omitted, the script location type is 'file' and the
+# location is interpreted as a local filesystem path pointing to a Sieve script
+# file or directory. Refer to Pigeonhole wiki or INSTALL file for more
+# information.
+
+plugin {
+  # The location of the user's main Sieve script or script storage. The LDA
+  # Sieve plugin uses this to find the active script for Sieve filtering at
+  # delivery. The "include" extension uses this location for retrieving
+  # :personal" scripts. This is also where the  ManageSieve service will store
+  # the user's scripts, if supported.
+  #
+  # Currently only the 'file:' location type supports ManageSieve operation.
+  # Other location types like 'dict:' and 'ldap:' can currently only
+  # be used as a read-only script source ().
+  #
+  # For the 'file:' type: use the ';active=' parameter to specify where the
+  # active script symlink is located.
+  # For other types: use the ';name=' parameter to specify the name of the
+  # default/active script.
+  sieve = file:~/sieve;active=~/.dovecot.sieve
+
+  # The default Sieve script when the user has none. This is the location of a
+  # global sieve script file, which gets executed ONLY if user's personal Sieve
+  # script doesn't exist. Be sure to pre-compile this script manually using the
+  # sievec command line tool if the binary is not stored in a global location.
+  # --> See sieve_before for executing scripts before the user's personal
+  #     script.
+  #sieve_default = /var/lib/dovecot/sieve/default.sieve
+
+  # The name by which the default Sieve script (as configured by the
+  # sieve_default setting) is visible to the user through ManageSieve.
+  #sieve_default_name =
+
+  # Location for ":global" include scripts as used by the "include" extension.
+  #sieve_global =
+
+  # The location of a Sieve script that is run for any message that is about to
+  # be discarded; i.e., it is not delivered anywhere by the normal Sieve
+  # execution. This only happens when the "implicit keep" is canceled, by e.g.
+  # the "discard" action, and no actions that deliver the message are executed.
+  # This "discard script" can prevent discarding the message, by executing
+  # alternative actions. If the discard script does nothing, the message is
+        # still discarded as it would be when no discard script is configured.
+  #sieve_discard =
+
+  # Location Sieve of scripts that need to be executed before the user's
+  # personal script. If a 'file' location path points to a directory, all the
+  # Sieve scripts contained therein (with the proper `.sieve' extension) are
+  # executed. The order of execution within that directory is determined by the
+  # file names, using a normal 8bit per-character comparison.
+  #
+  # Multiple script locations can be specified by appending an increasing number
+  # to the setting name. The Sieve scripts found from these locations are added
+  # to the script execution sequence in the specified order. Reading the
+  # numbered sieve_before settings stops at the first missing setting, so no
+  # numbers may be skipped.
+  #sieve_before = /var/lib/dovecot/sieve.d/
+  #sieve_before2 = ldap:/etc/sieve-ldap.conf;name=ldap-domain
+  #sieve_before3 = (etc...)
+  sieve_before = /etc/dovecot/sieve/default.sieve
+
+  # Identical to sieve_before, only the specified scripts are executed after the
+  # user's script (only when keep is still in effect!). Multiple script
+  # locations can be specified by appending an increasing number.
+  #sieve_after =
+  #sieve_after2 =
+  #sieve_after2 = (etc...)
+
+  # Which Sieve language extensions are available to users. By default, all
+  # supported extensions are available, except for deprecated extensions or
+  # those that are still under development. Some system administrators may want
+  # to disable certain Sieve extensions or enable those that are not available
+  # by default. This setting can use '+' and '-' to specify differences relative
+  # to the default. For example `sieve_extensions = +imapflags' will enable the
+  # deprecated imapflags extension in addition to all extensions were already
+  # enabled by default.
+  #sieve_extensions = +notify +imapflags
+
+  # Which Sieve language extensions are ONLY available in global scripts. This
+  # can be used to restrict the use of certain Sieve extensions to administrator
+  # control, for instance when these extensions can cause security concerns.
+  # This setting has higher precedence than the `sieve_extensions' setting
+  # (above), meaning that the extensions enabled with this setting are never
+  # available to the user's personal script no matter what is specified for the
+  # `sieve_extensions' setting. The syntax of this setting is similar to the
+  # `sieve_extensions' setting, with the difference that extensions are
+  # enabled or disabled for exclusive use in global scripts. Currently, no
+  # extensions are marked as such by default.
+  #sieve_global_extensions =
+
+  # The Pigeonhole Sieve interpreter can have plugins of its own. Using this
+  # setting, the used plugins can be specified. Check the Dovecot wiki
+  # (wiki2.dovecot.org) or the pigeonhole website
+  # (http://pigeonhole.dovecot.org) for available plugins.
+  # The sieve_extprograms plugin is included in this release.
+  sieve_plugins = sieve_imapsieve
+
+  # The separator that is expected between the :user and :detail
+  # address parts introduced by the subaddress extension. This may
+  # also be a sequence of characters (e.g. '--'). The current
+  # implementation looks for the separator from the left of the
+  # localpart and uses the first one encountered. The :user part is
+  # left of the separator and the :detail part is right. This setting
+  # is also used by Dovecot's LMTP service.
+  #recipient_delimiter = +
+
+  # The maximum size of a Sieve script. The compiler will refuse to compile any
+  # script larger than this limit. If set to 0, no limit on the script size is
+  # enforced.
+  #sieve_max_script_size = 1M
+
+  # The maximum number of actions that can be performed during a single script
+  # execution. If set to 0, no limit on the total number of actions is enforced.
+  #sieve_max_actions = 32
+
+  # The maximum number of redirect actions that can be performed during a single
+  # script execution. If set to 0, no redirect actions are allowed.
+  #sieve_max_redirects = 4
+
+  # The maximum number of personal Sieve scripts a single user can have. If set
+  # to 0, no limit on the number of scripts is enforced.
+  # (Currently only relevant for ManageSieve)
+  #sieve_quota_max_scripts = 0
+
+  # The maximum amount of disk storage a single user's scripts may occupy. If
+  # set to 0, no limit on the used amount of disk storage is enforced.
+  # (Currently only relevant for ManageSieve)
+  #sieve_quota_max_storage = 0
+
+  # The primary e-mail address for the user. This is used as a default when no
+  # other appropriate address is available for sending messages. If this setting
+  # is not configured, either the postmaster or null "<>" address is used as a
+  # sender, depending on the action involved. This setting is important when
+  # there is no message envelope to extract addresses from, such as when the
+  # script is executed in IMAP.
+  #sieve_user_email =
+
+  # The path to the file where the user log is written. If not configured, a
+  # default location is used. If the main user's personal Sieve (as configured
+  # with sieve=) is a file, the logfile is set to <filename>.log by default. If
+  # it is not a file, the default user log file is ~/.dovecot.sieve.log.
+  #sieve_user_log =
+
+  # Specifies what envelope sender address is used for redirected messages.
+  # The following values are supported for this setting:
+  #
+  #   "sender"         - The sender address is used (default).
+  #   "recipient"      - The final recipient address is used.
+  #   "orig_recipient" - The original recipient is used.
+  #   "user_email"     - The user's primary address is used. This is
+  #                      configured with the "sieve_user_email" setting. If
+  #                      that setting is unconfigured, "user_mail" is equal to
+  #                      "recipient".
+  #   "postmaster"     - The postmaster_address configured for the LDA.
+  #   "<user@domain>"  - Redirected messages are always sent from user@domain.
+  #                      The angle brackets are mandatory. The null "<>" address
+  #                      is also supported.
+  #
+  # This setting is ignored when the envelope sender is "<>". In that case the
+  # sender of the redirected message is also always "<>".
+  #sieve_redirect_envelope_from = sender
+
+  ## TRACE DEBUGGING
+  # Trace debugging provides detailed insight in the operations performed by
+  # the Sieve script. These settings apply to both the LDA Sieve plugin and the
+  # IMAPSIEVE plugin.
+  #
+  # WARNING: On a busy server, this functionality can quickly fill up the trace
+  # directory with a lot of trace files. Enable this only temporarily and as
+  # selective as possible.
+
+  # The directory where trace files are written. Trace debugging is disabled if
+  # this setting is not configured or if the directory does not exist. If the
+  # path is relative or it starts with "~/" it is interpreted relative to the
+  # current user's home directory.
+  #sieve_trace_dir =
+
+  # The verbosity level of the trace messages. Trace debugging is disabled if
+  # this setting is not configured. Possible values are:
+  #
+  #   "actions"        - Only print executed action commands, like keep,
+  #                      fileinto, reject and redirect.
+  #   "commands"       - Print any executed command, excluding test commands.
+  #   "tests"          - Print all executed commands and performed tests.
+  #   "matching"       - Print all executed commands, performed tests and the
+  #                      values matched in those tests.
+  #sieve_trace_level =
+
+  # Enables highly verbose debugging messages that are usually only useful for
+  # developers.
+  #sieve_trace_debug = no
+
+  # Enables showing byte code addresses in the trace output, rather than only
+  # the source line numbers.
+  #sieve_trace_addresses = no
+}

Dovecot/conf.d/auth-checkpassword.conf.ext

@@ -0,0 +1,21 @@
+# Authentication for checkpassword users. Included from 10-auth.conf.
+#
+# <doc/wiki/AuthDatabase.CheckPassword.txt>
+
+passdb {
+  driver = checkpassword
+  args = /usr/bin/checkpassword
+}
+
+# passdb lookup should return also userdb info
+userdb {
+  driver = prefetch
+}
+
+# Standard checkpassword doesn't support direct userdb lookups.
+# If you need checkpassword userdb, the checkpassword must support
+# Dovecot-specific extensions.
+#userdb {
+#  driver = checkpassword
+#  args = /usr/bin/checkpassword
+#}

Dovecot/conf.d/auth-deny.conf.ext

@@ -0,0 +1,15 @@
+# Deny access for users. Included from 10-auth.conf.
+
+# Users can be (temporarily) disabled by adding a passdb with deny=yes.
+# If the user is found from that database, authentication will fail.
+# The deny passdb should always be specified before others, so it gets
+# checked first.
+
+# Example deny passdb using passwd-file. You can use any passdb though.
+passdb {
+  driver = passwd-file
+  deny = yes
+
+  # File contains a list of usernames, one per line
+  args = /etc/dovecot/deny-users
+}

Dovecot/conf.d/auth-dict.conf.ext

@@ -0,0 +1,16 @@
+# Authentication via dict backend. Included from 10-auth.conf.
+#
+# <doc/wiki/AuthDatabase.Dict.txt>
+
+passdb {
+  driver = dict
+
+  # Path for dict configuration file, see
+  # example-config/dovecot-dict-auth.conf.ext
+  args = /etc/dovecot/dovecot-dict-auth.conf.ext
+}
+
+userdb {
+  driver = dict
+  args = /etc/dovecot/dovecot-dict-auth.conf.ext
+}

Dovecot/conf.d/auth-master.conf.ext

@@ -0,0 +1,16 @@
+# Authentication for master users. Included from 10-auth.conf.
+
+# By adding master=yes setting inside a passdb you make the passdb a list
+# of "master users", who can log in as anyone else.
+# <doc/wiki/Authentication.MasterUsers.txt>
+
+# Example master user passdb using passwd-file. You can use any passdb though.
+passdb {
+  driver = passwd-file
+  master = yes
+  args = /etc/dovecot/master-users
+
+  # Unless you're using PAM, you probably still want the destination user to
+  # be looked up from passdb that it really exists. pass=yes does that.
+  pass = yes
+}

Dovecot/conf.d/auth-passwdfile.conf.ext

@@ -0,0 +1,20 @@
+# Authentication for passwd-file users. Included from 10-auth.conf.
+#
+# passwd-like file with specified location.
+# <doc/wiki/AuthDatabase.PasswdFile.txt>
+
+passdb {
+  driver = passwd-file
+  args = scheme=CRYPT username_format=%u /etc/dovecot/users
+}
+
+userdb {
+  driver = passwd-file
+  args = username_format=%u /etc/dovecot/users
+
+  # Default fields that can be overridden by passwd-file
+  #default_fields = quota_rule=*:storage=1G
+
+  # Override fields from passwd-file
+  #override_fields = home=/home/virtual/%u
+}

Dovecot/conf.d/auth-sql.conf.ext

@@ -0,0 +1,30 @@
+# Authentication for SQL users. Included from 10-auth.conf.
+#
+# <doc/wiki/AuthDatabase.SQL.txt>
+
+passdb {
+  driver = sql
+
+  # Path for SQL configuration file, see example-config/dovecot-sql.conf.ext
+  args = /etc/dovecot/dovecot-sql.conf.ext
+}
+
+# "prefetch" user database means that the passdb already provided the
+# needed information and there's no need to do a separate userdb lookup.
+# <doc/wiki/UserDatabase.Prefetch.txt>
+#userdb {
+#  driver = prefetch
+#}
+
+userdb {
+  driver = sql
+  args = /etc/dovecot/dovecot-sql.conf.ext
+}
+
+# If you don't have any user-specific settings, you can avoid the user_query
+# by using userdb static instead of userdb sql, for example:
+# <doc/wiki/UserDatabase.Static.txt>
+#userdb {
+  #driver = static
+  #args = uid=vmail gid=vmail home=/var/vmail/%u
+#}

Dovecot/conf.d/auth-static.conf.ext

@@ -0,0 +1,24 @@
+# Static passdb. Included from 10-auth.conf.
+
+# This can be used for situations where Dovecot doesn't need to verify the
+# username or the password, or if there is a single password for all users:
+#
+#  - proxy frontend, where the backend verifies the password
+#  - proxy backend, where the frontend already verified the password
+#  - authentication with SSL certificates
+#  - simple testing
+
+#passdb {
+#  driver = static
+#  args = proxy=y host=%1Mu.example.com nopassword=y
+#}
+
+#passdb {
+#  driver = static
+#  args = password=test
+#}
+
+#userdb {
+#  driver = static
+#  args = uid=vmail gid=vmail home=/home/%u
+#}

Dovecot/conf.d/auth-system.conf.ext

@@ -0,0 +1,74 @@
+# Authentication for system users. Included from 10-auth.conf.
+#
+# <doc/wiki/PasswordDatabase.txt>
+# <doc/wiki/UserDatabase.txt>
+
+# PAM authentication. Preferred nowadays by most systems.
+# PAM is typically used with either userdb passwd or userdb static.
+# REMEMBER: You'll need /etc/pam.d/dovecot file created for PAM
+# authentication to actually work. <doc/wiki/PasswordDatabase.PAM.txt>
+passdb {
+  driver = pam
+  # [session=yes] [setcred=yes] [failure_show_msg=yes] [max_requests=<n>]
+  # [cache_key=<key>] [<service name>]
+  #args = dovecot
+}
+
+# System users (NSS, /etc/passwd, or similiar).
+# In many systems nowadays this uses Name Service Switch, which is
+# configured in /etc/nsswitch.conf. <doc/wiki/AuthDatabase.Passwd.txt>
+#passdb {
+  #driver = passwd
+  # [blocking=no]
+  #args =
+#}
+
+# Shadow passwords for system users (NSS, /etc/shadow or similiar).
+# Deprecated by PAM nowadays.
+# <doc/wiki/PasswordDatabase.Shadow.txt>
+#passdb {
+  #driver = shadow
+  # [blocking=no]
+  #args =
+#}
+
+# PAM-like authentication for OpenBSD.
+# <doc/wiki/PasswordDatabase.BSDAuth.txt>
+#passdb {
+  #driver = bsdauth
+  # [blocking=no] [cache_key=<key>]
+  #args =
+#}
+
+##
+## User databases
+##
+
+# System users (NSS, /etc/passwd, or similiar). In many systems nowadays this
+# uses Name Service Switch, which is configured in /etc/nsswitch.conf.
+userdb {
+  # <doc/wiki/AuthDatabase.Passwd.txt>
+  driver = passwd
+  # [blocking=no]
+  #args =
+
+  # Override fields from passwd
+  #override_fields = home=/home/virtual/%u
+}
+
+# Static settings generated from template <doc/wiki/UserDatabase.Static.txt>
+#userdb {
+  #driver = static
+  # Can return anything a userdb could normally return. For example:
+  #
+  #  args = uid=500 gid=500 home=/var/mail/%u
+  #
+  # LDA and LMTP needs to look up users only from the userdb. This of course
+  # doesn't work with static userdb because there is no list of users.
+  # Normally static userdb handles this by doing a passdb lookup. This works
+  # with most passdbs, with PAM being the most notable exception. If you do
+  # the user verification another way, you can add allow_all_users=yes to
+  # the args in which case the passdb lookup is skipped.
+  #
+  #args =
+#}

Dovecot/conf.d/auth-vpopmail.conf.ext

@@ -0,0 +1,17 @@
+# Authentication for vpopmail users. Included from 10-auth.conf.
+#
+# <doc/wiki/AuthDatabase.VPopMail.txt>
+
+passdb {
+  driver = vpopmail
+
+  # [cache_key=<key>] [webmail=<ip>]
+  args =
+}
+
+userdb {
+  driver = vpopmail
+
+  # [quota_template=<template>] - %q expands to Maildir++ quota
+  args = quota_template=quota_rule=*:backend=%q
+}

Dovecot/conf.d/protocols.conf

@@ -0,0 +1 @@
+protocols = imap lmtp sieve

Dovecot/dovecot.conf

@@ -39,7 +39,7 @@
 #instance_name = dovecot
 
 # Greeting message for clients.
-#login_greeting = Dovecot ready.
+login_greeting = Library of Code sp-us Staff Services | IMAP/SIEVE/LMTP (Debian/GNU)
 
 # Space separated list of trusted network ranges. Connections from these
 # IPs are allowed to override their IP addresses and ports (for logging and

Dovecot/sieve/default.sieve

@@ -0,0 +1,4 @@
+require "fileinto";
+if header :contains "X-Spam-Flag" "YES" {
+    fileinto "Junk";
+}

Nginx/nginx.conf

@@ -42,7 +42,7 @@ http {
         ssl_session_cache shared:SSL:10m;
         ssl_ciphers ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384;
         ssl_dhparam /etc/nginx/dhparam.pem;
-        ssl_ecdh_curve secp384r1;
+        ssl_ecdh_curve X25519, prime256v1, secp384r1;
 
         ##
         # Logging Settings

OpenDKIM/KeyTable

@@ -0,0 +1,2 @@
+dkim._domainkey.staff.libraryofcode.org staff.libraryofcode.org:dkim:/etc/opendkim/keys/staff.libraryofcode.org/dkim.private
+dkim._domainkey.libraryofcode.org libraryofcode.org:dkim:/etc/opendkim/keys/libraryofcode.org/dkim.private

OpenDKIM/SigningTable

@@ -0,0 +1,5 @@
+*@staff.libraryofcode.us dkim._domainkey.staff.libraryofcode.us
+*@libraryofcode.us dkim._domainkey.libraryofcode.us
+*@staff.libraryofcode.org dkim._domainkey.staff.libraryofcode.org
+*@libraryofcode.org dkim._domainkey.libraryofcode.org
+*@lists.libraryofcode.org dkim._domainkey.staff.libraryofcode.org

OpenDKIM/TrustedHosts

@@ -0,0 +1,7 @@
+127.0.0.1
+localhost
+63.141.252.130
+63.141.252.133
+staff.libraryofcode.org
+libraryofcode.org
+*.libraryofcode.org

OpenDKIM/opendkim.conf

@@ -0,0 +1,18 @@
+Syslog                  Yes
+UMask                   002
+OversignHeaders         From
+
+AutoRestart             Yes
+AutoRestartRate         10/1h
+Canonicalization        relaxed/simple
+ExternalIgnoreList      refile:/etc/opendkim/TrustedHosts
+InternalHosts           refile:/etc/opendkim/TrustedHosts
+KeyTable                refile:/etc/opendkim/KeyTable
+SigningTable            refile:/etc/opendkim/SigningTable
+LogWhy                  Yes
+Mode                    sv
+PidFile                 /var/run/opendkim/opendkim.pid
+SignatureAlgorithm      rsa-sha256
+Socket                  inet:8891@localhost
+SyslogSuccess           Yes
+UserID                  opendkim:opendkim

OpenDMARC/opendmarc.conf

@@ -0,0 +1,95 @@
+# This is a basic configuration that can easily be adapted to suit a standard
+# installation. For more advanced options, see opendkim.conf(5) and/or
+# /usr/share/doc/opendmarc/examples/opendmarc.conf.sample.
+
+##  AuthservID (string)
+##      defaults to MTA name
+#
+#AuthservID OpenDMARC
+
+##  FailureReports { true | false }
+##      default "false"
+##
+# FailureReports true
+
+PidFile /var/run/opendmarc/opendmarc.pid
+
+##  RejectFailures { true | false }
+##      default "false"
+##
+RejectFailures true
+
+##  Socket socketspec
+##      default (none)
+##
+##  Specifies the socket that should be established by the filter to receive
+##  connections from sendmail(8) in order to provide service.  socketspec is
+##  in one of two forms: local:path, which creates a UNIX domain socket at
+##  the specified path, or inet:port[@host] or inet6:port[@host] which creates
+##  a TCP socket on the specified port for the appropriate protocol family.
+##  If the host is not given as either a hostname or an IP address, the
+##  socket will be listening on all interfaces.  This option is mandatory
+##  either in the configuration file or on the command line.  If an IP
+##  address is used, it must be enclosed in square brackets.
+#
+#Socket local:/var/run/opendmarc/opendmarc.sock
+Socket local:/var/spool/postfix/opendmarc/opendmarc.sock
+
+##  Syslog { true | false }
+##      default "false"
+##
+##  Log via calls to syslog(3) any interesting activity.
+#
+Syslog true
+
+##  SyslogFacility facility-name
+##      default "mail"
+##
+##  Log via calls to syslog(3) using the named facility.  The facility names
+##  are the same as the ones allowed in syslog.conf(5).
+#
+# SyslogFacility mail
+
+##  TrustedAuthservIDs string
+##      default HOSTNAME
+##
+##  Specifies one or more "authserv-id" values to trust as relaying true
+##  upstream DKIM and SPF results.  The default is to use the name of
+##  the MTA processing the message.  To specify a list, separate each entry
+##  with a comma.  The key word "HOSTNAME" will be replaced by the name of
+##  the host running the filter as reported by the gethostname(3) function.
+#
+TrustedAuthservIDs staff.libraryofcode.org, libraryofcode.org, *.libraryofcode.org, lists.libraryofcode.org, localhost
+
+
+##  UMask mask
+##      default (none)
+##
+##  Requests a specific permissions mask to be used for file creation.  This
+##  only really applies to creation of the socket when Socket specifies a
+##  UNIX domain socket, and to the HistoryFile and PidFile (if any); temporary
+##  files are normally created by the mkstemp(3) function that enforces a
+##  specific file mode on creation regardless of the process umask.  See
+##  umask(2) for more information.
+#
+UMask 0002
+
+##  UserID user[:group]
+##      default (none)
+##
+##  Attempts to become the specified userid before starting operations.
+##  The process will be assigned all of the groups and primary group ID of
+##  the named userid unless an alternate group is specified.
+#
+UserID opendmarc
+
+## Path to system copy of PSL (needed to determine organizational domain)
+#
+PublicSuffixList /usr/share/publicsuffix/
+
+IgnoreAuthenticatedClients true
+
+RequiredHeaders true
+SPFSelfValidate true
+
+IgnoreHosts /etc/opendmarc/ignore.hosts

OpenVPN/server.conf

@@ -0,0 +1,302 @@
+# Which local IP address should OpenVPN
+# listen on? (optional)
+;local a.b.c.d
+
+# Which TCP/UDP port should OpenVPN listen on?
+# If you want to run multiple OpenVPN instances
+# on the same machine, use a different port
+# number for each one.  You will need to
+# open up this port on your firewall.
+port 1194
+
+# TCP or UDP server?
+;proto tcp
+proto udp
+
+# "dev tun" will create a routed IP tunnel,
+# "dev tap" will create an ethernet tunnel.
+# Use "dev tap0" if you are ethernet bridging
+# and have precreated a tap0 virtual interface
+# and bridged it with your ethernet interface.
+# If you want to control access policies
+# over the VPN, you must create firewall
+# rules for the the TUN/TAP interface.
+# On non-Windows systems, you can give
+# an explicit unit number, such as tun0.
+# On Windows, use "dev-node" for this.
+# On most systems, the VPN will not function
+# unless you partially or fully disable
+# the firewall for the TUN/TAP interface.
+;dev tap
+dev tun
+
+# Windows needs the TAP-Win32 adapter name
+# from the Network Connections panel if you
+# have more than one.  On XP SP2 or higher,
+# you may need to selectively disable the
+# Windows firewall for the TAP adapter.
+# Non-Windows systems usually don't need this.
+;dev-node MyTap
+
+# SSL/TLS root certificate (ca), certificate
+# (cert), and private key (key).  Each client
+# and the server must have their own cert and
+# key file.  The server and all clients will
+# use the same ca file.
+#
+# See the "easy-rsa" directory for a series
+# of scripts for generating RSA certificates
+# and private keys.  Remember to use
+# a unique Common Name for the server
+# and each of the client certificates.
+#
+# Any X509 key management system can be used.
+# OpenVPN can also use a PKCS #12 formatted key file
+# (see "pkcs12" directive in man page).
+ca ca.crt
+cert staffserver.crt
+key staffserver.key.pem  # This file should be kept secret
+
+# Diffie hellman parameters.
+# Generate your own with:
+#   openssl dhparam -out dh2048.pem 2048
+dh dh.pem
+
+# Network topology
+# Should be subnet (addressing via IP)
+# unless Windows clients v2.0.9 and lower have to
+# be supported (then net30, i.e. a /30 per client)
+# Defaults to net30 (not recommended)
+;topology subnet
+
+# Configure server mode and supply a VPN subnet
+# for OpenVPN to draw client addresses from.
+# The server will take 10.8.0.1 for itself,
+# the rest will be made available to clients.
+# Each client will be able to reach the server
+# on 10.8.0.1. Comment this line out if you are
+# ethernet bridging. See the man page for more info.
+server 10.8.0.0 255.255.255.0
+server-ipv6 fd00:b956:4dc2::/64
+
+# Maintain a record of client <-> virtual IP address
+# associations in this file.  If OpenVPN goes down or
+# is restarted, reconnecting clients can be assigned
+# the same virtual IP address from the pool that was
+# previously assigned.
+ifconfig-pool-persist ipp.txt
+
+# Configure server mode for ethernet bridging.
+# You must first use your OS's bridging capability
+# to bridge the TAP interface with the ethernet
+# NIC interface.  Then you must manually set the
+# IP/netmask on the bridge interface, here we
+# assume 10.8.0.4/255.255.255.0.  Finally we
+# must set aside an IP range in this subnet
+# (start=10.8.0.50 end=10.8.0.100) to allocate
+# to connecting clients.  Leave this line commented
+# out unless you are ethernet bridging.
+;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100
+
+# Configure server mode for ethernet bridging
+# using a DHCP-proxy, where clients talk
+# to the OpenVPN server-side DHCP server
+# to receive their IP address allocation
+# and DNS server addresses.  You must first use
+# your OS's bridging capability to bridge the TAP
+# interface with the ethernet NIC interface.
+# Note: this mode only works on clients (such as
+# Windows), where the client-side TAP adapter is
+# bound to a DHCP client.
+;server-bridge
+
+# Push routes to the client to allow it
+# to reach other private subnets behind
+# the server.  Remember that these
+# private subnets will also need
+# to know to route the OpenVPN client
+# address pool (10.8.0.0/255.255.255.0)
+# back to the OpenVPN server.
+;push "route 192.168.10.0 255.255.255.0"
+;push "route 192.168.20.0 255.255.255.0"
+
+push "route-ipv6 2000::/3"
+push "dhcp-option DNS 2001:4860:4860::8888"
+push "dhcp-option DNS 2001:4860:4860::8844"
+
+# To assign specific IP addresses to specific
+# clients or if a connecting client has a private
+# subnet behind it that should also have VPN access,
+# use the subdirectory "ccd" for client-specific
+# configuration files (see man page for more info).
+
+# EXAMPLE: Suppose the client
+# having the certificate common name "Thelonious"
+# also has a small subnet behind his connecting
+# machine, such as 192.168.40.128/255.255.255.248.
+# First, uncomment out these lines:
+;client-config-dir ccd
+;route 192.168.40.128 255.255.255.248
+# Then create a file ccd/Thelonious with this line:
+#   iroute 192.168.40.128 255.255.255.248
+# This will allow Thelonious' private subnet to
+# access the VPN.  This example will only work
+# if you are routing, not bridging, i.e. you are
+# using "dev tun" and "server" directives.
+
+# EXAMPLE: Suppose you want to give
+# Thelonious a fixed VPN IP address of 10.9.0.1.
+# First uncomment out these lines:
+;client-config-dir ccd
+;route 10.9.0.0 255.255.255.252
+# Then add this line to ccd/Thelonious:
+#   ifconfig-push 10.9.0.1 10.9.0.2
+
+# Suppose that you want to enable different
+# firewall access policies for different groups
+# of clients.  There are two methods:
+# (1) Run multiple OpenVPN daemons, one for each
+#     group, and firewall the TUN/TAP interface
+#     for each group/daemon appropriately.
+# (2) (Advanced) Create a script to dynamically
+#     modify the firewall in response to access
+#     from different clients.  See man
+#     page for more info on learn-address script.
+;learn-address ./script
+
+# If enabled, this directive will configure
+# all clients to redirect their default
+# network gateway through the VPN, causing
+# all IP traffic such as web browsing and
+# and DNS lookups to go through the VPN
+# (The OpenVPN server machine may need to NAT
+# or bridge the TUN/TAP interface to the internet
+# in order for this to work properly).
+push "redirect-gateway def1 bypass-dhcp"
+
+# Certain Windows-specific network settings
+# can be pushed to clients, such as DNS
+# or WINS server addresses.  CAVEAT:
+# http://openvpn.net/faq.html#dhcpcaveats
+# The addresses below refer to the public
+# DNS servers provided by opendns.com.
+push "dhcp-option DNS 10.8.0.1"
+;push "dhcp-option DNS 1.1.1.1"
+
+# Uncomment this directive to allow different
+# clients to be able to "see" each other.
+# By default, clients will only see the server.
+# To force clients to only see the server, you
+# will also need to appropriately firewall the
+# server's TUN/TAP interface.
+;client-to-client
+
+# Uncomment this directive if multiple clients
+# might connect with the same certificate/key
+# files or common names.  This is recommended
+# only for testing purposes.  For production use,
+# each client should have its own certificate/key
+# pair.
+#
+# IF YOU HAVE NOT GENERATED INDIVIDUAL
+# CERTIFICATE/KEY PAIRS FOR EACH CLIENT,
+# EACH HAVING ITS OWN UNIQUE "COMMON NAME",
+# UNCOMMENT THIS LINE OUT.
+duplicate-cn
+
+# The keepalive directive causes ping-like
+# messages to be sent back and forth over
+# the link so that each side knows when
+# the other side has gone down.
+# Ping every 10 seconds, assume that remote
+# peer is down if no ping received during
+# a 120 second time period.
+keepalive 10 120
+
+# For extra security beyond that provided
+# by SSL/TLS, create an "HMAC firewall"
+# to help block DoS attacks and UDP port flooding.
+#
+# Generate with:
+#   openvpn --genkey --secret ta.key
+#
+# The server and each client must have
+# a copy of this key.
+# The second parameter should be '0'
+# on the server and '1' on the clients.
+tls-auth ta.key 0 # This file is secret
+key-direction 0
+
+# Select a cryptographic cipher.
+# This config item must be copied to
+# the client config file as well.
+# Note that 2.4 client/server will automatically
+# negotiate AES-256-GCM in TLS mode.
+# See also the ncp-cipher option in the manpage
+cipher AES-256-CBC
+auth SHA256
+
+# Enable compression on the VPN link and push the
+# option to the client (2.4+ only, for earlier
+# versions see below)
+;compress lz4-v2
+;push "compress lz4-v2"
+
+# For compression compatible with older clients use comp-lzo
+# If you enable it here, you must also
+# enable it in the client config file.
+;comp-lzo
+
+# The maximum number of concurrently connected
+# clients we want to allow.
+;max-clients 100
+
+# It's a good idea to reduce the OpenVPN
+# daemon's privileges after initialization.
+#
+# You can uncomment this out on
+# non-Windows systems.
+user nobody
+group nogroup
+
+# The persist options will try to avoid
+# accessing certain resources on restart
+# that may no longer be accessible because
+# of the privilege downgrade.
+persist-key
+persist-tun
+
+# Output a short status file showing
+# current connections, truncated
+# and rewritten every minute.
+status openvpn-status.log
+
+# By default, log messages will go to the syslog (or
+# on Windows, if running as a service, they will go to
+# the "\Program Files\OpenVPN\log" directory).
+# Use log or log-append to override this default.
+# "log" will truncate the log file on OpenVPN startup,
+# while "log-append" will append to it.  Use one
+# or the other (but not both).
+log         openvpn.log
+log-append  openvpn.log
+
+# Set the appropriate level of log
+# file verbosity.
+#
+# 0 is silent, except for fatal errors
+# 4 is reasonable for general usage
+# 5 and 6 can help to debug connection problems
+# 9 is extremely verbose
+verb 4
+
+# Silence repeating messages.  At most 20
+# sequential messages of the same message
+# category will be output to the log.
+;mute 20
+
+# Notify the client that when the server restarts so it
+# can automatically reconnect.
+explicit-exit-notify 1
+
+plugin /usr/lib/openvpn/openvpn-plugin-auth-pam.so login

Postfix/main.conf

@@ -1,7 +1,7 @@
 # See /usr/share/postfix/main.cf.dist for a commented, more complete version
 
 # Server Information
-smtpd_banner = $myhostname Library of Code sp-us Staff Services | ESMTP (Debian/GNU)
+smtpd_banner = $myhostname LIBRARY OF CODE SP-US STAFF SVCS | ESMTP (Debian/GNU)
 myhostname = staff.libraryofcode.org
 myorigin = /etc/mailname
 mydestination = $myhostname, libraryofcode.org
@@ -43,8 +43,8 @@ smtpd_tls_CAfile = /etc/postfix/ssl/globalsign.ca.crt
 smtpd_tls_loglevel = 1
 smtpd_tls_received_header = yes
 smtpd_tls_session_cache_timeout = 3600s
-smtpd_tls_mandatory_protocols = !SSLv2, !SSLv3, !TLSv1, !TLSv1.1
-smtpd_tls_protocols = !SSLv2, !SSLv3, !TLSv1, !TLSv1.1
+smtpd_tls_mandatory_protocols = !SSLv3, !TLSv1, !TLSv1.1
+smtpd_tls_protocols = !SSLv3, !TLSv1, !TLSv1.1
 smtpd_tls_mandatory_ciphers = medium
 tls_random_source = dev:/dev/urandom
 tls_medium_cipherlist = ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384

scripts/dovecotsymlinks.py

@@ -0,0 +1,33 @@
+#!/usr/bin/env python
+"""
+    Copyright (C) 2021  Library of Code sp-us, Department of Engineering
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <https://www.gnu.org/licenses/>.
+"""
+
+import os
+
+blocks = os.listdir("Dovecot/conf.d")
+path = os.path.abspath("Dovecot/conf.d")
+old_blocks = os.listdir("/etc/nginx/sites-available")
+
+for block in blocks:
+  os.symlink("%s/%s" % (path, block), "/etc/dovecot/conf.d/%s" % block)
+
+sieveBlocks = os.listdir("Dovecot/sieve")
+path = os.path.abspath("Dovecot/sieve")
+
+for block in sieveBlocks:
+  os.symlink("%s/%s" % (path, block), "/etc/dovecot/sieve/%s" % block)
+

scripts/nginxsymlinks.py

@@ -1,6 +1,5 @@
 #!/usr/bin/env python
 """
-    <one line to give the program's name and a brief idea of what it does.>
     Copyright (C) 2021  Library of Code sp-us, Department of Engineering
 
     This program is free software: you can redistribute it and/or modify